Opening of the exhibition / Get-Together in the exhibition

09:00

Advantage through knowledge, memory training
Markus Hofmann, MEMO-Mind Brainproducts GmbH, München/Germany

Coffee break in the exhibition

Block 1   

Quality assurance and material  (Keplersaal)

Interface management of turbo set maintenance in RWE Power AG hard coal and gas-fired power plants
Andreas Hinterthan, Bruno Schroeder, RWE Power AG, Dormagen/Germany, Sebastian Buchwald, RWE Power AG, Werne/Germany

Effects of sealing surface damage. Opportunities for assessment
Rainer Arndt, Kempchen Dichtungstechnik GmbH, Oberhausen/Germany

System solutions in maintenance and new design of fittings and components
Meik Brinkmann, E.ON Anlagenservice GmbH, Gummersbach/Germany

Lunch break  in the exhibition

Damage evaluation and restoration of a dynamically stressed reinforced concrete ceiling
Dr. Jörg Bockhold, Dr. Klemens Pelle, Ingenieurbüro für Bauwesen Dr.-Ing. Clemens Pelle, Dortmund/Germany

Powerpac ageing management with status monitoring on existing and newly erected transformers
r. Hermann Farwick, Haltern, Dr. Georg Erick, MCIG, Sullsingen/Germany, Manuel Löhr, Mistras Group, Hamburg/Germany

Coffee break  in the exhibition

Implementation of power plant flexibilisation through detailed analysis of thick-walled componenets
Axel Schulz, Röglin, Astrid Schulze, Dr. Robert Wernicke, TÜV Nord SysTec, Hamburg/Germany

Plant safety and lifetime  extension through selection of the right corrosion protection in power plants
Ralf Kleinwechter, HAW Linings GmbH, Bockenem/Germany

Evening event
Oldtimerfabrik-Classic, Lessingstr. 5, 89231 Neu-Ulm/Germany

Block 2   

Retrofitting and increasing efficiency  (Salon Bonn)

Increasing the availability of turbo-generators through comprehensive lifelong diagnostics - examples of use
Jürgen R. Weidner, Siemens AG, Mülheim a.d. Ruhr/Germany

Dampfturbinenventillaufrüstung
Roger Padfield, Nicolas Marsh, Mike Davies, Alstom Power Service LTD., Warwickshire/England

Lunch break  in the exhibition

The new VGB standard „Parameters in maintenance“
Michael Lux, STEAG Power Saar GmbH, Bexbach/Germany

Rehabilitation of the Ataka power plant boiler 1 & 2
Dr. Martin Pogoreutz, Dr. Ulrich Hohenwarter, Theodor Bauer, ANDRITZ Energy & Environment GmbH, Graz/Österreich

Coffee break  in the exhibition

Increasing plant efficiency, safety and condition assessment by means of BANG&CLEAN
Markus Bürgin, Urs Steiner, Bang&Clean Technologies AG, Remetschwil/Schweiz

Increasing the efficiency and availability of existing power plants
Dr. Christian Storm, Babcock Borsig Steinmüller GmbH, Oberhausen/Germany

Evening event
Oldtimerfabrik-Classic, Lessingstr. 5, 89231 Neu-Ulm/Germany

Block 3

Current conditions  (Keplersaal)

Risk and insurance management in the maintenance of power plants
Dr. Michael Härig, Marsh GmbH, Düsseldorf/Germany

EU tender of maintenance services
Dr. Arne Frick, Saphirion Ltd. & Co. KG, Eppstein/Germany, Daniel Kriegesmann, btconsult GmbH, Frechen/Germany, Wolfgang Reinke, Kraftwerk Gera GmbH, Gera/Germany

Safety-related acceptance according to BetrSichV in new constructions and conversions in power plants
Bernhard Hoffmann, Ralf Seidel, RWE Power AG, Grevenbroich/Germany, Erika Moch, TÜV Nord Systems GmbH & Co. KG, Essen/Germany

Coffee break  in the exhibition

Quality Pro, a tool for planning and implementation of quality requirements
Wolfgang Czolkoss, VGB PowerTech e.V., Essen/Germany

Overhaul management of the power plant units at Vattenfall Europe Generation AG
Gerald Weiß, Vattenfall Europe Generation AG, Peitz/Germany

Measures taken by the plant operators as a response to the EU stress test
Dr. Andreas Strohm, EnBW Kernkraft GmbH, Neckarwestheim/Germany

 Lunch break  in the exhibition

Network stability in the case of an increasing wind power and photovoltaic feed-in
Prof. Dr.-Ing. Harald Weber, Universität Rostock, Rostock/Germany

The event in Fukushima
Thomas Linnemann, VGB PowerTech e.V., Essen/Germany

Closing words
Joachim Kahlert, Vattenfall Europe Generation AG, Cottbus/Germany

Block 4

Technology, experience, damages  (Salon Bonn)

Damage to pipng through insulation
Horst Bohn, EnBW Kernkraft GmbH, Philippsburg/Germany

Successful planning and execution of annual overhaul at the Trianel Gaskraftwerk Hamm GmbH & Co KG, effectively supported by a modern maintenance management system
Björn Sude, Nico Wissner, Pascal Schulte, Fortum Service Deutschland GmbH, Hamburg/Germany

Maintenance of the modular 5 MW biomass plants in Germany
Peter Gemeinhardt, Jouko Latva-Somppi, Metso Automation GmbH, Leverkusen/Germany

Coffee break  in the exhibition

Experiences made with vibration analysis and operational balancing in power plants
Dr. Edwin Becker, PRÜFTECHNIK Condition Monitoring GmbH, Ismaning/Geramy

Use of an innovative device as a safety shield in fossil-fired steam generators
Sven Lohmann, Axel Pauly, Thomas Furth, Hitachi Power Europe GmbH, Duisburg/Germany

Terrestrial laser scanning (TLS) in the maintenance of power plants; innovative measurement technology; Added value for power plant technology
Michael Petersen, ÖbVl Petersen, Gelsenkirchen/Germany

Lunch break  in the exhibition

Closing words  (Keplersaal)
Joachim Kahlert, Vattenfall Europe Generation AG, Cottbus/Germany