Suchergebnisse für 'Transparent face protection against droplet infection'

Artikel 1 bis 20 von 35 gesamt

pro Seite
Seite:
  1. 1
  2. 2

In aufsteigender Reihenfolge
  1. Monitoring, limiting and protection devices on steam turbine plants

    Monitoring, limiting and protection devices on steam turbine plants

    Bestell-Kennz.: VGB-S-103-00-2020-02-EN-ebook
    zzgl. Steuern: 270,00 € Inkl. Steuern: 283,50 € ab: 189,00 €

    This standard is addressed to manufacturers, service providers and operators of steam turbine plants and is  in particular to assist operators in equipping their steam turbine plants.

    The safe operation of steam turbines makes great demands on monitoring, limiting and protection devices.

  2. Elektrischer Blockschutz

    Elektrischer Blockschutz

    Bestell-Kennz.: VGB-S-162-00-2020-02-DE-ebook
    zzgl. Steuern: 270,00 € Inkl. Steuern: 283,50 € ab: 189,00 €

    5 Jahre nach der Erstveröffentlichung wurde auf Initiative der VGB-Fachgruppe „Elektrische Maschinen und Anlagen“ in einem Fachgespräch der Überarbeitungsbedarf des VGB-Standards „Elektrischer Blockschutz“ (VGB-S-025) diskutiert. Im Ergebnis wurde eine Überarbeitung und Neuausgabe mit der neuen Nummernsystematik VGB-S-162 entschieden.

  3. Code of Practice for Lifecycle Management  of Reinforced Concrete Cooling Towers in Power Plants (eBook)

    Code of Practice for Lifecycle Management of Reinforced Concrete Cooling Towers in Power Plants (eBook)

    Bestell-Kennz.: R613e-ebook
    zzgl. Steuern: 110,00 € Inkl. Steuern: 115,50 € ab: 94,50 €

    This Guideline addresses the lifecycle management of reinforced concrete cooling towers. Lifecycle management comprises maintenance of the structure and measures to ensure the safety of a cooling tower. Effective lifecycle management must be preventive and knowledge-based.

    *Dieses Produkt ist ebenfalls in deutscher Sprache erhältlich.

  4. Structural Design of Cooling Towers - eBook

    Structural Design of Cooling Towers - eBook

    Bestell-Kennz.: VGB-S-610-00-2019-10-EN-ebook
    zzgl. Steuern: 270,00 € Inkl. Steuern: 283,50 € ab: 189,00 €

    This VGB-Standard VGB-S-610, “Structural Design of Cooling Towers” constitutes the joint basis – together with VGB-R 135e and VGB-R 612e – for the civil engineering-related planning including design, construction and approval as well as for the con-struction of cooling tower facilities built from reinforced concrete.

  5. Condition Monitoring and Inspection of Components of Steam Boiler Plants, Pressure Vessel Installations and Water- or Steam-Pipes in Thermal Power Plants - 3rd edition 2019

    Condition Monitoring and Inspection of Components of Steam Boiler Plants, Pressure Vessel Installations and Water- or Steam-Pipes in Thermal Power Plants - 3rd edition 2019

    Bestell-Kennz.: VGB-S-506-00-2019-02-EN-ebook
    zzgl. Steuern: 390,00 € Inkl. Steuern: 409,50 € ab: 273,00 €

    This VGB Standard describes possibilities and methods for condition monitoring and performance of tests and inspections in due consideration of hazards especially arising from steam and pressure in components of steam boiler plants, pressure vessel installations and water- or steam pipework.

  6. Measures for the avoidance and handling of instrumentation and control equipment failures

    Measures for the avoidance and handling of instrumentation and control equipment failures

    Bestell-Kennz.: VGB-S-170-12-2018-08-EN-ebook
    zzgl. Steuern: 140,00 € Inkl. Steuern: 147,00 € ab: 94,50 €

    The former VGB Guideline VGB-R 170 A1e “Measures for the avoidance and handling of instrumentation and control equipment failures” was used since 2005 for the support during the specification and assessment of control and instrumentation systems with regard to their robustness against failures at increasing use of standard IT components and IT networks.

  7. Interaction of Conformity Assessment and Industrial Safety in Hydropower Plants

    Interaction of Conformity Assessment and Industrial Safety in Hydropower Plants

    Bestell-Kennz.: VGB-S-033-00-2017-07-EN-ebook
    zzgl. Steuern: 270,00 € Inkl. Steuern: 283,50 € ab: 189,00 €

    The objective of this VGB-Standard is to provide employers a reference framework for making safe work equipment available in the field of hydropower, which indicates what concrete statutory requirements have to be observed.

  8. Fire Protection in Onshore Wind Turbines - eBook

    Fire Protection in Onshore Wind Turbines - eBook

    Bestell-Kennz.: VGB-S-017-00-2018-09-EN-ebook
    zzgl. Steuern: 180,00 € Inkl. Steuern: 189,00 € ab: 126,00 €

    Fire-fighting operations by fire brigades in onshore wind turbines are almost impossible because of their height and resulting difficulty of accessing them. For this reason, fire prevention, early detection and early fighting of a fire, and the self-rescue of persons present in the installations during a fire are key considerations

  9. Corrosion Protection for  Offshore Wind Structures - Part 4: Cathodic Protection (CP) - eBook

    Corrosion Protection for Offshore Wind Structures - Part 4: Cathodic Protection (CP) - eBook

    Bestell-Kennz.: VGB-S-021-04-2018-07-EN
    zzgl. Steuern: 0,00 € Inkl. Steuern: 0,00 €

    The VGB-Standard VGB-S-021 is concerned with offshore structures made of steel. In its various parts it takes into account all essential factors having significance for appropriate corrosion protection.

  10. Application, design and quality assurance criteria for the use of fibre-reinforced plastics in power plant construction

    Application, design and quality assurance criteria for the use of fibre-reinforced plastics in power plant construction

    Bestell-Kennz.: VGB-S-609-00-2016-03-EN-ebook
    zzgl. Steuern: 220,00 € Inkl. Steuern: 231,00 € ab: 157,50 €

    This VGB-Standard replaces the former VGB guideline VGB-R 609e, which had the same title and dates from 2003. 

  11. Indication and Application of Actions on Buildings in Power Plants

    Indication and Application of Actions on Buildings in Power Plants

    Bestell-Kennz.: VGB-S-602-00-2016-04-EN-ebook
    zzgl. Steuern: 240,00 € Inkl. Steuern: 252,00 € ab: 189,00 €

    The aim of this VGB standard is to provide a consistent procedure for the definition, classification and processing of actions on load-bearing structures for the construc-tion of power plants. It is also intended to cover significant influences of operation-induced fluctuating states like the filling levels of tanks and the frequency and pro-cesses of filling and emptying operations.

  12. Process Quality in Power Engineering - eBook

    Process Quality in Power Engineering - eBook

    Bestell-Kennz.: VGB-S-012-00-2016-02-EN-ebook
    zzgl. Steuern: 180,00 € Inkl. Steuern: 189,00 € ab: 126,00 €

    In the construction of new power plants and during the overhaul of process control systems in existing plants, the implementation of special tools for process optimization is increasingly becoming part of the instrumentation and control (I&C) contractor’s  scope of supply. Although these modules have different designations, depending  on the manufacturer or supplier, they often draw upon similar approaches, data models and processing algorithms.

  13. Acceptance Test Measurements and Operational Monitoring of Water-Cooled Surface Condensers - eBook

    Acceptance Test Measurements and Operational Monitoring of Water-Cooled Surface Condensers - eBook

    Bestell-Kennz.: VGB-S-130-00-2017-07-EN-ebook
    zzgl. Steuern: 270,00 € Inkl. Steuern: 283,50 €

    More than twenty years ago, in 1994, the first edition of this standard was published in response to the rapid technological development and the growing importance of condensers in plant construction. Now that the standard has been tried and tested in many respects over the last few decades and the economic viability of a plant continues to be heavily influenced by the operation of its condensation system, it has been decided to maintain and update the standard. A fundamental revision was not necessary.

  14. Preservation of Steam and Gas Turbo-Generator Sets - 2nd edition

    Preservation of Steam and Gas Turbo-Generator Sets - 2nd edition

    Bestell-Kennz.: VGB-S-036-00-2017-04-EN-ebook
    zzgl. Steuern: 280,00 € Inkl. Steuern: 294,00 € ab: 199,50 €

    The editorial team has decided to take the steam turbine and the generator from the VGB-R 116 “Preservation of Power Plants” (republished as VGB-S-116-00-2016-04- EN “Preservation of Power Plants”), to add a section on the gas turbine and to publish both together in this revised VGB standard “VGB-S-036-00-2017-04”. 

  15. Construction and installation supervision in the manufacture and assembly of water-tube boilers and associated systems in thermal power plants

    Construction and installation supervision in the manufacture and assembly of water-tube boilers and associated systems in thermal power plants

    Bestell-Kennz.: VGB-S-013-00-2017-04-EN-ebook
    zzgl. Steuern: 320,00 € Inkl. Steuern: 336,00 € ab: 220,50 €

    This VGB-Standard on construction and installation supervision in the manufacturing and assembly of water-tube boilers and associated systems in thermal power plants has been revised in intensive discussions between the Fachverband Dampfkessel-, Behälter- und Rohrleitungsbau e.V. (FDBR – Association of Steam Boiler, Pressure Vessel and Piping Manufacturers) and VGB PowerTech e.V. (VGB) and has been endorsed by the FDBR. The purpose of this VGB-Standard is to assist in securing the quality expected and required by the plant owner or operator as the customer.

  16. Avoidance of generator damage resulting from condensation on live parts - eBook

    Avoidance of generator damage resulting from condensation on live parts - eBook

    Bestell-Kennz.: VGB-S-164-12-2016-10-EN-ebook
    zzgl. Steuern: 280,00 € Inkl. Steuern: 294,00 € ab: 199,50 €

    The moisture contained in gaseous substances condenses on impact with colder surfaces to a greater of lesser extent, depending on the ambient conditions and in particular on pressure and temperature. If this occurs in the area of non-insulated electrical connections inside the generator, it is hardly possible to avoid electrical faults. Several cases of damage to power plant generators with similar causes and developments resulting from condensation as outlined above have provided grounds for the VGB Project Group on Generators to analyse the causes and compile recommendations for action to avoid such damage in future.

  17. Recommendations  for thermal/mechanical  generator protection - eBook

    Recommendations for thermal/mechanical generator protection - eBook

    Bestell-Kennz.: VGB-S-164-11-2016-08-EN-ebook
    zzgl. Steuern: 280,00 € Inkl. Steuern: 294,00 € ab: 199,50 €

    To detect incipient damage to generators in power plants, protective equipment is installed. For electrical protection, in 2012 VGB published recommendations in the VGB-Standard VGB-S-025 “Electrical Generating Unit Protection”. The VGBStandard in hand, VGB-S-164-11, shows the protective measures that can be taken when thermal limits are exceeded or leaks and other malfunctions occur. These protective measures relate to so-called thermal/mechanical generator protection and cover generators for thermal power plants, hydroelectric power plants and wind turbines.

  18. Protection Measures  on Reinforced Concrete Cooling Towers and Chimneys against Operational and Environmental Impacts (eBook)

    Protection Measures on Reinforced Concrete Cooling Towers and Chimneys against Operational and Environmental Impacts (eBook)

    Bestell-Kennz.: R612e-ebook
    zzgl. Steuern: 110,00 € Inkl. Steuern: 115,50 € ab: 94,50 €

    As a result of particular impacts and stresses affecting reinforced concrete cooling towers and chimneys and strengthend by their special structures and conditions of operation, adequate instructions are required for contractors initially applying or renewing surface protection systems. This Guideline therefore takes the form of additional technical stipulations to supplement the existing standards and codes. In this spirit, the Guideline is intended to assist the customer as an aid to decision-making and a basis for inviting tenders, placing orders and performing work of this kind. The customer in this context may be the owner and/or operator or a company employed by these.

    *Dieses Produkt ist ebenfalls in deutscher Sprache erhältlich.

  19. Monitoring, limiting and protection devices on gas turbine systems - eBook

    Monitoring, limiting and protection devices on gas turbine systems - eBook

    Bestell-Kennz.: VGB-S-121-00-2016-04-EN-ebook
    zzgl. Steuern: 210,00 € Inkl. Steuern: 220,50 € ab: 157,50 €

    Monitoring, limiting and protection devices must satisfy stringent requirements in order to afford safe and reliable operation of gas turbine units. The present revision was aimed at considering the present state of the art and the current codes of practice and ISO and VDMA standards. This Standard applies to stationary gas turbines (single-shaft and multi-shaft turbines) used to drive generators and other machinery.

  20. Chimneys for Operation without Flue Gas Reheating after FGD

    Chimneys for Operation without Flue Gas Reheating after FGD

    Bestell-Kennz.: M643e-ebook
    zzgl. Steuern: 100,00 € Inkl. Steuern: 105,00 € ab: 73,50 €

    The enactment of the amended version of the 13th Ordinance for the Implementation of the Federal Immission Control Act (13. BImSchV; Ordinance on Large Combustion and Gas Turbine Plants, [1]) in July 2004 effectively aligned the German ambient pollution control requirements with the current European regulations. Apart from redefined emission limit values for flue gas contents, a significant change (in the case of discharge by chimney) is the dropping of a minimum flue gas temperature of 72° C at the chimney outlet. For plant design, this means that reheating of the flue gases after wet flue gas desulfurization is no longer necessary.

    *Dieses Produkt ist ebenfalls in deutscher Sprache erhältlich.

Artikel 1 bis 20 von 35 gesamt

pro Seite
Seite:
  1. 1
  2. 2

In aufsteigender Reihenfolge