Corrosion Protection for Offshore Wind Structures - Part 4: Cathodic Protection (CP) - eBook

ehem. Bestell-Kennz.: Nein
ISBN: urn:isbn:978-3-96284-068-6
Bestell-Kennz.: VGB-S-021-04-2018-07-EN
Erscheinungsdatum: 16.01.2019

Verfügbarkeit: Auf Lager

zzgl. Steuern: 0,00 € Inkl. Steuern: 0,00 €
Kostenloser Download
Corrosion Protection for Offshore Wind Structures - Part 4: Cathodic Protection (CP) (VGB-S-021-04-2018-07-EN)

Kurzbeschreibung

The growing number of wind turbines in Europe and the world raise new challenges to operators. To reduce the cost of installation and operation and to increase operating reliability, a coordinated and joint analysis of operating experience is an absolute necessity. Apart from exchanging information and experience, the participating companies mainly strive to promote standardisation (best practice). To this end, VGB PowerTech e.V. and Bundesanstalt für Wasserbau (BAW – Federal Waterways Engineering and Research Institute) have decided jointly to draw up a VGB/BAW Standard on corrosion protection for offshore structures (e.g. offshore stations).

The aim of this standard is to ensure that the considerable investments in offshore structures are safeguarded by appropriate corrosion protection systems. In this context, coating systems, for instance, are to protect the steel structures of offshore units from corrosion damage during their entire service life – which is normally at least 25 years – and without requiring any expensive repair work. Robust systems are therefore required which, while involving calculable manufacturing costs (CAPEX), can keep the operating costs (OPEX) at a predictable and low level in the long term. Repair work at sea is to be avoided, as the cost of such offshore repair work can exceed the cost of onshore repairs by a factor of as much as 100. 

In this Part 4, “Cathodic Protection” the planning, design, operation and monitoring of galvanic and impressed-current protection systems are described. In the previously published Parts 1 to 3, corrosion protection in general is discussed and stress zones are defined in Part 1. Part 2 focusses on the requirements of coating systems, and Part 3 on the proper application of the initial coating. Parts 5 and 6 are currently in preparation and will be concerned with the topics of coating system repair and in-service inspection and monitoring.

Corrosion Protection for  Offshore Wind Structures - Part 4: Cathodic Protection (CP) - eBook

Klicken Sie doppelt auf das obere Bild, um es in voller Größe zu sehen

Verkleinern
Vergrößern

Weitere Information

* Pflichtfelder

zzgl. Steuern: 0,00 € Inkl. Steuern: 0,00 €

Sie könnten auch an folgenden Artikeln interessiert sein

Korrosionsschutz von Offshore-Bauwerken zur Nutzung der Windenergie - Teil 1: Allgemeines - eBook

VGB-S-021-01-2018-04-DE-ebook
zzgl. Steuern: 0,00 € Inkl. Steuern: 0,00 €

Korrosionsschutz von Offshore-Bauwerken zur Nutzung der Windenergie - Teil 4: Kathodischer Korrosionsschutz (KKS) - eBook

VGB-S-021-04-2018-07-DE
zzgl. Steuern: 0,00 € Inkl. Steuern: 0,00 €

Korrosionsschutz von Offshore-Bauwerken zur Nutzung der Windenergie - Teil 2: Anforderungen an Korrosionsschutzsysteme - eBook

VGB-S-021-02-2018-04-DE-ebook
zzgl. Steuern: 0,00 € Inkl. Steuern: 0,00 €

Korrosionsschutz von Offshore-Bauwerken zur Nutzung der Windenergie - Teil 3: Applikation von Beschichtungssystemen - eBook

VGB-S-021-03-2018-04-DE-ebook
zzgl. Steuern: 0,00 € Inkl. Steuern: 0,00 €